How does a screw-in filter attach to my lens?
Validated 13 November 2026
Applies to
- Line
- Filters
Resolution
- 01
Find your lens's filter thread size. It is marked on the front of the lens barrel or on the inside of the lens cap, as a number followed by mm, and it is listed in the lens specifications.
- 02
Look the lens up in the Tiffen Camera Lens to Filter Chart if the marking is absent or unreadable. The chart lists brand, lens description and filter size across roughly 1,790 rows and links a collection for each size: https://tiffen.com/pages/filter-to-lens-chart
- 03
Buy the filter in the same number. Tiffen states it plainly: check the size of your lens, such as 49mm or 67mm, and choose the same size filter. Tiffen screw-in sizes run from 25mm to 138mm across 29 diameters.
- 04
Set the filter flat against the front of the lens and turn it clockwise, viewed from the front, with light finger pressure only.
- 05
Stop as soon as the filter seats. It needs no more than finger tight to stay on, and further tightening is what makes it hard to remove later.
- 06
Screw a second filter onto the front of the first where you want two. Tiffen states its screw-in filters are double threaded and can be screwed together.
- 07
Fit a smartphone filter mount first if you are shooting on a phone. Tiffen's 58mm Smart Phone Filter Mount attaches with MagSafe and is stated to fit iPhone models 12 to 16 Pro Max. A 58mm filter then threads onto it.