Is my filter faulty, or is that what it is supposed to look like?
Validated 13 November 2026
Applies to
- Line
- Filters
- Attribute
- Diffusion and effect filters
Resolution
- 01
Examine the filter against a bright, even surface. A window or a white wall illuminates the full face. A point source produces its own artifacts and makes the assessment unreliable.
- 02
Clean the filter once, then examine it again. Remove loose dust with a blower, then use a clean microfiber cloth and a lens fluid formulated for coated optics. Work from the center outward.
- 03
Classify what remains.
- The mark cleaned off. It was surface residue. The glass is unaffected.
- The mark remains and does not move. Tilt the filter through several angles. A mark that keeps its shape and position at every angle is in the glass or in the coating.
- The texture covers the whole face. Diffusion filters carry their effect within the glass. An even texture across the full face, seen in transmitted light, is the filter operating as designed.
- 04
Record two photographs. One of the filter against a plain background with the mark visible, and one frame shot through the filter showing the effect in question.
- 05
Send both photographs and your order details to Tiffen support, with the subject you were shooting and the age of the filter.