Should I leave a filter on the lens permanently?
Validated 13 November 2026
Applies to
- Line
- Filters
Resolution
- 01
Choose the filter for the job of staying on. Tiffen names two: the UV Protector, which it states can be left on the lens at all times to protect it from physical damage, and the Sky 1-A, which it states many photographers leave on at all times and which adds a touch of warmth.
- 02
Fit effect filters for the shot and take them off after it. A diffusion filter, a neutral density and a polarizer all change the image on every frame they are on, and each of them is chosen against a specific subject and light.
- 03
Check the corners when a second filter goes on top of the one already there. Tiffen states that adding filters can create vignetting, meaning the corners of the frame are cut off, and that this happens more with wide angle lenses. Shoot one frame at your widest focal length and your smallest aperture and look at all four corners.
- 04
Read both Tiffen positions before deciding to leave a protector on underneath a polarizer. The knowledge base states the results are virtually the same either way. The FAQ states that stacking can reduce image quality slightly and does not recommend it, especially with the Circular Polarizer. Both are published.
- 05
Unscrew and refit the filter from time to time so you know it still turns. A filter that has never been moved is one you have never confirmed you can remove.