Skip to content
Support

Filters, Steadicam, Domke, Lowel, Davis & Sanford, Zing.

Can a Volt be retrofitted to my sled, and which upgrade is correct?

Validated 13 November 2026

Applies to

Line
Steadicam
Attribute
Volt

Resolution

  1. 01

    Identify your gimbal. The Volt fits to the gimbal, and the published compatibility lists are lists of gimbals.

  2. 02

    Check the list in the Volt GK-1 manual, which is the most recent of the three Tiffen publishes. It names upgrade kits for the Archer, Clipper, Shadow, Ultra2, M-1 and M-2, PRO CineLive, PRO CineHD, and Betz gimbals, and it tells the reader to check with Tiffen for the latest list.

  3. 03

    Choose between the two published routes. The complete Volt gimbal kit replaces your gimbal with an M-2 gimbal that already has the Volt motor assembly installed on your chosen side; this is what Tiffen says most operators order. The Volt gimbal upgrade kit adds Volt components to a gimbal you already own.

  4. 04

    For the complete kit, the steps are: install the Volt control box on the top stage, swap the existing gimbal for the new M-2 gimbal with the Volt motor assembly, then add power and gimbal cables and balance.

  5. 05

    For an upgrade kit, the steps are: install the control box on the top stage; if necessary upgrade and balance a legacy gimbal to Volt compatibility using the Volt yoke kit; add the pan encoder ring, pulleys, motor assembly and belts; flip the electronics orientation for a right-side motor; then add cables and balance.

  6. 06

    Add the yoke exchange if your gimbal is not already Volt compatible. Tiffen directs you to exchange the yoke and balance the gimbal before adding the Volt gimbal motor assembly.

  7. 07

    Order the nose box adapter for an Ultra-2, Clipper or Archer rig, which need it to take the Volt control box.

  8. 08

    Decide two things before you start: which side of the sled the control box knobs will face, and which side of the gimbal the motor assembly will mount on.

  9. 09

    Check third-party stabilizers against the warranty list before installing. As of February 2023 the only authorized non-Steadicam products for Volt installation are Betz, Pro, XCS, MK-V, Smart Systems and Optical Support.

  10. 10

    Contact Tiffen Steadicam service with your gimbal model, post diameter and sled model for the current kit part number and price.

Cause

The Volt is a gimbal-mounted system. The motor assembly drives the trunnion and the handle through belts and pulleys mounted on the gimbal itself, and a pan encoder ring on the gimbal tells the control box where the sled is pointing. That is why compatibility is decided by the gimbal, and why a gimbal designed before the Volt needs its yoke exchanged and rebalanced first.

Ask us about thisSend your question and this article travels with it, so the answer starts where the article stopped.Send us the question