Skip to content
Support

Filters, Steadicam, Domke, Lowel, Davis & Sanford, Zing.

Does a contrast filter raise the black point?

Validated 13 November 2026

Applies to

Line
Filters
Attribute
Ultra Contrast

Resolution

  1. 01

    Measure it on your own camera. Frame a subject that contains a real black, such as an unlit recess or black velvet, alongside a white and a mid gray.

  2. 02

    Shoot the frame twice, with the filter and without, keeping exposure, aperture, shutter and lighting identical between the two.

  3. 03

    Read the black level on a waveform monitor or on the histogram, at the same point in the frame in both images. The difference between the two readings is the answer for that filter, that scene and that light.

  4. 04

    Repeat the pair at each density you are considering. Tiffen sells its contrast and diffusion lines as ladders of density, and the strength of the effect follows the density.

  5. 05

    Repeat the pair with the frame lit differently before you generalize the result. A contrast filter is one of the diffusion-family filters, and Tiffen states that a filter in that family may control resolution, contrast and halation, or any one or two of them.

  6. 06

    Compare lines on the published chart before choosing. The Triangle of Diffusion places Ultra Contrast, Low Contrast and every other Tiffen diffusion line on halation, contrast and resolution axes, so you can see which ones act mostly on contrast: https://cdn.shopify.com/s/files/1/2560/2536/files/Tiffen_Triangle_of_Diffusion.pdf The Diffusion Guide at https://tiffen.com/pages/diffusion-guide covers the same range in prose.

Ask us about thisSend your question and this article travels with it, so the answer starts where the article stopped.Send us the question