Why does my diffusion filter bloom or flare around highlights?
Validated 13 November 2026
Applies to
- Line
- Filters
- Attribute
- Diffusion
Resolution
- 01
Confirm the glow is the effect you bought. Tiffen states that diffusion filters control resolution, contrast and halation, and defines halation as the glow around a light source. A bloom around a practical light, a specular highlight or the moon is that property operating.
- 02
Shoot the same highlight twice, once with the filter and once without, with the exposure and the framing unchanged. This separates the filter's halation from lens flare, which changes with the angle of the source to the lens and survives removing the filter.
- 03
Change the grade to change the strength. Each Tiffen diffusion line is sold as a ladder of densities, and the published set differs by line: Black Pro-Mist runs 1/8, 1/4, 1/2, 1, 2 and 3, while Soft/FX runs 1/2, 1, 2, 3 and 4. The full list for every line is on the Diffusion Guide at https://tiffen.com/pages/diffusion-guide.
- 04
Change the line to change the character of the glow. The Diffusion Guide groups the range by how each family behaves on halation, and the Triangle of Diffusion chart places every line on halation, contrast and resolution axes. Two grades that soften an image by the same amount can bloom differently.
- 05
Reduce the source if the bloom is larger than you want at the grade you have chosen. Lower the practical, move it out of frame, or reduce exposure on it, and shoot the test in step 2 again at the new level.
- 06
Check the glass if the pattern is localized to one part of the frame rather than around every highlight. Diffusion filters carry their effect inside the glass, so the texture is even across the whole face. A bloom in one corner only is worth photographing and sending to Tiffen support.
Cause
Halation is one of the three image properties a Tiffen diffusion filter is built to control, alongside resolution and contrast. Tiffen states this directly, and states that a given filter type may control one, two or all three.
The glow around a highlight is therefore the filter working, and its size and character are set by which line you fitted and which density in that line.